Do you want to know how to clean up the air ducts in your home? Are you looking for DIY tips for air duct cleaning? Do not search further; below are t
Do you want to know how to clean up the air ducts in your home? Are you looking for DIY tips for air duct cleaning? Do not search further; below are the tips on how you can clean your air ducts in your home without hassles. Follow the instructions outlined below:
Tools You Need for Air Duct Cleaning
You need to get the following tools or items to clean your air ducts:
- Gloves
- Googles
- Dust Mask
- Brush
- Furnace filter
- Power drill
- Cleaning cloth
- Paper towels
You need to identify the right air duct to clean. The simple way to identify the correct vent to clean is to turn on the HVAC unit and do a simple tissue test. Place a tissue over the vent; if it sticks, it is the return vent. If the tissue does not stick, it is the supply vent that blows cool or warm air into your home. The supply vent is what you need to clean.
Step-by-step Air Duct Cleaning Guidelines
Wear your safety goggles and gloves, and follow the steps below for air duct cleaning:
Step 1: Unscrew and remove the air duct covers using the power drill. But stuff paper towels into the supply vents and cover the vents you are cleaning to prevent dust from covering your home.
Step 2: Set the HVAC’s thermostat to the “Fan On” position to blow the dust loosened while cleaning. However, ensure that the cool or heat mode is turned off.
Step 3: Tap the ductwork lightly with the handle of your brush to loosen the buildups of dust in the ducts. Tap all accessible ductwork in the basement to loosen the dust.
Step 4: Remove the paper towels and begin to clean the supply vents by sweeping out the dust. Turn on your vacuum and place the end of the hose very close to the supply vent’s register. The running vacuum will catch the dust coming from the supply vent, as the fan blows them out. You can push the hose into the vent as far as it can go. Use a damp cloth to clean the vent’s interior as far as your hand can go into the vent.
Step 5: Clean the return registers as well, pushing as far as your hand can reach.
Step 6: Turn off the fan and furnace from the thermostat, as well as the breaker panel, the main power supply control to the home. This will allow you to clean the blower compartment and return air boot. Use the vacuum to remove the dust in the blower compartment and return air boot. Also, clean the furnace fan.
Step 7: Replace the furnace filter as well for overall improved performance of the HVAC system. Clogged filters will undermine your effort, that is why replacing the filters will bring about better results.
Step 8: Replace the covers and turn on the HVAC. Meanwhile, you may open the windows to allow the remnant dust that will be blown out to get out of the house. Let the system run and clean the entire home using your vacuum.
Takeaway
The above are the steps to clean the air ducts in your home. Meanwhile, if you want the best result possible, contact us for the best air duct cleaning. We assure you of an enhanced experience.
COMMENTS